How do you roll, how do you wick? 😊

[John (Sárik János)]

Hi Tibor!
This is what this particular cotton looks like during use.
The package consists of multiple sheets.

From these, I remove the top layer.

I cut a strip from it by eye, say about 4-4.5 mm for a 2mm core.

I carefully removed the top and bottom layers from it.

I roll up what I use a bit and pull it into the coil.

That’s pretty much it. It’s true that it’s more work compared to Bpmods, but it pays off in flavor reproduction.

[Zoli76]

I’m starting to get into it

(I’ll slack off in January

[Angel31]

I’ll try it myself someday, especially if it performs well in the Dvar

[John (Sárik János)]

I used Cotton Clouds cotton in Dvarw for a long time, but I was already curious about what this Muji might be like. Obviously, it’s a matter of personal taste, but now I feel that this one worked better for me than the other.

[Bela_Czovek (Béla Czövek)]

Great!
Thanks for it!

[trakktoros (Traktoros)]

Probably the coil is far from the air intake, and it’s also questionable what the wire is? If you have 0.3mm wire (which is perhaps specifically for building), that’s rather for MTL use. The triple core size is large (in my opinion), find a 2.5mm drill bit, and try to coil it so there are no gaps between the wraps. The coil should be as close as possible to where the air enters. I fear this atomizer will never be good, especially for MTL… That’s all the advice I can think of right now.

Kanthal wire is the best for starting, it’s easy to handle, and the chance of making a mistake is minimal. Also, pay attention, before you put the cotton in, you need to pulse the coil first (important!).

That’s about all the advice I can think of.

If something comes up, I’ll write to you privately.

[Bela_Czovek (Béla Czövek)]

Thank you very much.

I wicked and adjusted it before, I will also trim the cotton back before the next refill, maybe it’s gurgling/spitting because of that. The next coil build will be on a smaller core.

With this, I gave up on MTL, it remains DL, although 0.65 ohm might be a lot this way, true, it pushes vapor properly at 23 watts, varying the liquid too because of the nicotine, but even so, it hits hard.

[trakktoros (Traktoros)]

Probably there is too little (loose) cotton in the coil, and there are gaps between the wraps, which is why it pops, sputters, and gurgles. This core size (3mm) is good for DL. I think after a while everyone reaches restricted DL… Respect to the exception

[TheSoftParade1968 (Zolee)]

I also linked the same video above in private, apparently ineffectively.
It might also be strange that the Noch coil I put in-

-SS316, not Kanthal.
IMHO, if you restrict the airflow, it will be good with that too.
(I’m not really an MTL guy)
DL forever!

[Bela_Czovek (Béla Czövek)]

Yes, it popped up as I checked, just foolishly without subtitles.

Yes, it had this in it, 0.25 ohm according to the mod.

[Zolika (Czeglédi Zoltán)]

I guess it’ll be good

![IMG_5446|37

[Zolika (Czeglédi Zoltán)]

I’ve fallen in love with tube mods

Slowly I’m transitioning to Old School

But ONE more is missing for this year, it has already started its way to my homeland, and if all goes well, it will be in my hands this year

[Zoli76]

Aromatherapy is super in this form too

[Robertcapa]

Like a WWI English pilot’s mustache…

[Zoli76]

Running like dynamite….

[Zolika (Czeglédi Zoltán)]

The “intervention” has happened

I trimmed it, it’s already warmed up

[Zolika (Czeglédi Zoltán)]

The usual

[Lawicska]

Hi everyone.

And they say the juice doesn’t ‘cheat’. My partner put A&L Luna +1% swoke cooling agent in it. He/She says that flavor was good. Suddenly it wrote to him/her that ‘check atomizer’. I don’t even understand why. Error fixed, the vandy is running again.