Voopoo drag hiba

Questions
,
1

Hi guys, Voopoo Drag 9.25Wh 3.7V .6 ohm coil. The problem appeared after a few days, the display switches to 0.8ohm, or shows 0. Can anything be done about it, or is it junk?

![20250423_083313|375x500

3 Likes
2

Hi! If the atomizer has been used for X days, then I suspect a connection issue that has developed over time. (Condensation, moisture, movement, something else). Remove the head, clean it, put it back. If it’s still unstable, replace it, try another one.

7 Likes
3

Hi!

I also think there’s a contact issue between the atomizer and the mod.
Don’t have high hopes for the Voopoo Drag, I’ve had 3 of them fail. I learned my lesson.

6 Likes
4

I have a brand new one, maybe I tried it 2x, with a 510 adapter. But the normal ones drive my above-average power-hungry MTL tanks better. So it’s sitting there…

5 Likes
5

If you use it this often, you’ll be fine, it will last forever… :h

5 Likes
6

Hi Atis!! I’m not even sure about that!!

4 Likes
7

I clean it several times a day.
It seems I’ve found the problem. The screws of the metal plate above the sink were loose. It’s good for now. :grinning_face:

4 Likes
8

Thanks for the help. :slightly_smiling_face:

3 Likes
9

Contact error, I told you so :slightly_smiling_face: this is the better case.

2 Likes
10

Yes, fortunately, that’s all.:grinning_face:

Zoli76 messaged from Vaperina noreply@vaperina.cc wrote this (date: 2025. Apr. 24., Thu 8:39):

4 Likes