Mixing question đŸ˜Č

Questions
,
1

Good evening!

This is my umpteenth question, but I’ve encountered an unknown situation. I want to mix a new flavor.

King’s Crest Tabaco Dulce 30ml flavor.
Naturally, the pg-vg (floravita), nic (full pg 100mg/ml) are separate.

The goal is 70vg 30pg, 6mg nic.

That’s where I got stuck: the bottle says 30% mixing ratio, and when I try to calculate it in the calculator, it shows -pg.

Although I tried asking my friend ChatGPT, it wrote a recommendation, but I don’t know if it’s credible. I am aware that if the ratio is higher, the final quantity is smaller.

My question is, can I follow the recipe described by ChatGPT?

UPDATE: I think the lower one, 25%, might be the winner.

Thank you for your help and have a good evening!

A kĂ©pernyƑn egy e-liquid keverĂ©si recept lĂĄthatĂł az összetevƑk, mennyisĂ©gek Ă©s megjegyzĂ©sek rĂ©szletezĂ©sĂ©vel. (Feliratozva AI-val)
A kĂ©pernyƑn egy e-liquid keverĂ©si recept lĂĄthatĂł az összetevƑk, mennyisĂ©gek Ă©s megjegyzĂ©sek rĂ©szletezĂ©sĂ©vel. (Feliratozva AI-val)1080×2412 177 KB

Az kép egy e-liquid keverési receptjét mutatja be, amely 120 ml folyadékból åll, 25% aroma arånnyal, 6 mg/ml nikotintartalommal és 30% PG / 70% VG arånnyal. (Feliratozva AI-val)
Az kĂ©p egy e-liquid keverĂ©si receptjĂ©t mutatja be, amely 120 ml folyadĂ©kbĂłl ĂĄll, 25% aroma arĂĄnnyal, 6 mg/ml nikotintartalommal Ă©s 30% PG / 70% VG arĂĄnnyal. (Feliratozva AI-val)1080×2412 173 KB

Egy egyszerƱsĂ­tett rajzolt alak prĂłbĂĄl egy kockĂĄt egy hĂĄromszög alakĂș nyĂ­lĂĄsba tolni. (Feliratozva AI-val)
Egy egyszerƱsĂ­tett rajzolt alak prĂłbĂĄl egy kockĂĄt egy hĂĄromszög alakĂș nyĂ­lĂĄsba tolni. (Feliratozva AI-val)498×216 13.5 KB

3

Good, damn it :joy:

2 Likes
4

Hi! Interesting! Yes, in the meantime Gilbert AI informed me that more flavors will be needed.
But anyway, Keverde did a great job at 25%, of course without me having to add extra PG, of course with 5mg nic.

Ingredients Amount Percentage
PG 0ml 0.00%
VG 84ml 70.00%
Nicotine 6ml 5.00%
Flavor 1 30ml 25.00%
Total 120ml 100%
2 Likes
5

I adjusted the slider the wrong way.. yes, this way it won’t be precisely 70/30. If you stick to the 30%.. but if you listen to my advice, add a bit.. there will be a bit less VG.. but the flavor will be better.

2 Likes
6

A 1% difference is negligible, I don’t think I’d even notice. It doesn’t matter if it’s exactly that precise, as long as it doesn’t leak from the RTA. :smiley:

But I don’t know if I should stick to 30%. The bottle and the manufacturer’s website say this much. Other sites say 20-25%. So far, it’s only leaked once. I hope it doesn’t happen now :smiley: I need to save because I only have 4 dl of VG left :smiley:

1 Like
7

For a long time, I also stuck to 70/30, probably because I watched a lot of TamĂĄs FehĂ©r. When I started, he was everywhere. Then I got many good tips here @Zolika :heart: thank you. The point is, nothing will leak even with 50/50 if it’s properly put together, maintained, built.

And it’s absolutely true. Currently, I mix 55/45 + the flavor in RTA, Aio, RDA as well.

And we know, the more PG, the better the flavor.

4 Likes
8

That’s a nice little AIO. My Fat Rabbit leaks even if I look at it funny.

2 Likes
9

30vg 70 pg let it go. The RDTA only leaks if it lies down :rofl:

3 Likes
10

No. This is new. Yes, the customization.
Based on your advice, 55 VG 45 PG and 30% flavor.

Ingredients Quantity Percentage
PG 9ml 9.00%
VG 55ml 55.00%
Nicotine 6ml 6.00%
Flavor 1 30ml 30.00%
Total 100ml 100%
3 Likes
11

Consider the aroma as PG: 30 ml aroma, 15 ml PG, 5

3 Likes
12

I fixed it above, but here it is again:

Ingredients Amount Percentage
PG 9ml 9.00%
VG 55ml 55.00%
Nicotine 6ml 6.00%
Flavor 1 30ml 30.00%
Total 100ml 100%
3 Likes
13

Yup like this.

3 Likes
14

I have one RTA, a Blaze Solo, it doesn’t leak a single drop
 rather it draws my blood.. :joy: even though it’s had 50/50 in it for a while now.

Where is the fat rabbit leaking from?

2 Likes
15

Of course, bottom. But I will try with other cotton, I have about 4 types.

  • Cotton clouds, boxed
  • Vapefly Firebolt
  • Dr. Cotton
  • and some noname
2 Likes
16

Previously, I think with K Flavour, a similar problem came up with the ratios not adding up. Of course, because the manufacturer probably calculates without nicotine, as that’s how the 70/30, 30% works out perfectly. So with these, you have to adjust the PG/VG ratio, as was written above. :slightly_smiling_face:

4 Likes
17

Through the nose and mouth. :rofl: It’s a tendency at the bottom airflow.

2 Likes
18

It’s jammed. I’m trying not to force the whole thing out of it. But this is a recurring problem. I bought a brand new one because the previous one got stuck to the build. It does the same thing. Maybe I’ll try cutting the leg 1 mm shorter than the recommended factory setting and see. I only wicked/coiled it in dual. But the Zeus X, it has no problems, of course.

2 Likes
19

I’m already watching a video about it :joy: I’m interested in everything :joy:

2 Likes
20

Unfortunately, it didn’t convince me, even though I was able to wick it.

2 Likes
21

There are videos galore, like a nuisance. Most of them do it sped up. Anyway, back then I bought that tank because of FT’s video :smiley: But the choice and taste are “subjective”

2 Likes