Help!!!

Hi everyone!

I’ve gotten into the big Boro lifestyle with a BPmods Razor AIO. Interesting at first glance, to say the least. My problem is that it has no flavor. Currently, I don’t have another device nearby to properly test the liquid, but I somehow doubt it’s supposed to be just a bland base flavor.

What I noticed is that it supposedly has a 3 ohm coil in it, but it consistently reads between 0.4-0.6. Now, I’ve cleaned the pod, the mod, disassembled it, reassembled it, but it still doesn’t deliver. I don’t know if the two can be related. The whole thing feels a bit strange to me, it’s a bit loose, not fitting well, this whole mod, but maybe this is a characteristic of Boro setups(?). Does anyone have any tips? Thanks!

2 Likes

3 Ohm is way too much!:blush:… I guess it’s a typo. 0.4-0.6 is fine for DL, but not if it’s constantly showing different readings. So you should try it with another coil too (even better if it’s from another mod)… to rule out a factory defect as the cause.

4 Likes

Hi!
Things must fit, on all levels, nothing can be “loose”, because then it won’t measure the Ohm correctly.
As a first step, I would at least watch a short video about it to see how it works.

Maybe a coil change too, but the tank must be assembled properly with the device.
:saluting_face: :face_with_raised_eyebrow:

5 Likes

Hi everyone! Thank you very much for the answers! 
It seems I managed it. I messed up, indeed 0.5g of powder was added instead of 0.3g, but it measured it erratically. I fiddled with it, tweaked it, took it out-put it back in, wiped it again, and also changed the battery, now it shows exactly 0.5g.
On the other hand, the base liquid turned out a bit weak, I must have miscalculated something with the flavor, or it’s just this light by design, but it needed a lot more flavor. Yet its scent was very potent, oh well, learned from this too! 
I still need to get used to this, it’s not a simple 510 tank that you just screw in and vape (at least for me)! :smiley:

6 Likes

That’s true, because this is even simpler!
-prime the coil head
-put it in the tank, fill it up, reassemble it with the “device”
-wait approx. 5-10 minutes
-vape, blissed out
I think only disposables are simpler, “more convenient” than a rebuildable coil. :grimacing: :zipper_mouth_face:
BUT WHAT IS THAT EVEN LIKE!?
:saluting_face:

4 Likes

You might be right, but it tricked me at first. :smiley: It’s also true that a few years have passed since I last vaped, so there’s plenty of the clumsy factor in there too.

5 Likes