Hi everyone!
Well, I messed up! I had a clone Byka V9. I managed with it until now, although it sometimes gave me headaches… This morning it gave up, and now it’s checkmate! Don’t ask me what’s wrong with it, I don’t know exactly. It doesn’t detect the coil and displays 0.04 ohm. So it doesn’t work!
So I’m left here, regretting it…
Does anyone have a used MTL tank for sale that is simple, easy to coil (I struggled a lot with the Byka, sometimes I could barely take it apart!) urgently and cheaply?
I don’t understand tanks… I’m really clueless in this topic!
I can pay in person in Tiszakécske, or via bank transfer for postal shipping 
Really urgent because I haven’t vaped since this morning!
Thanks for the help, Tia
3 Likes
Hi!
The mod is likely the problem, but check the screws in the V9, tighten them at the bottom and at the coil connection. And is a piece of wire sticking out from the coil that might cause a short circuit?
9 Likes
Hi! The mod is good because I dug up the original atomizer tank where the atomizer has been sitting for about 2 years. It shows that it would work with it, but I don’t have a new atomizer! I took the By-Ka apart 3 times and my 15-year-old son also tried to bring it to life. I’d gladly mail it to anyone who feels motivated enough to breathe life into it… it can stay there!
7 Likes
There isn’t much that can go wrong this badly in it; at most, some insulator needs to be replaced, and as I said, there is a short circuit… I would gladly give another RTA, but I see we are far from each other.
8 Likes
It worked until now and I don’t understand what happened to it… I turn it the same way as before, everything is the same. You might be right that it’s some small gasket issue, but I really don’t know much about it and there’s no man in the house (apart from my sons) who could take a look at it.
6 Likes
There’s a large screw at the bottom of the RTA. Loosen it, then tighten it. Do this a few times. That could be the error, which is what I would check first.
9 Likes
The air nozzle? Because there are 2 small screws underneath and the big one in the middle which is for airflow. It’s a longish thing. That goes up for the coil building.
I tried to work magic on that too…
Honestly, before I wrote here, I spent 3 hours trying to bring it to life.
I re-wicked/re-coiled it a good few times, disassembled it, tightened screws etc. but it doesn’t like me 
4 Likes
If you can, come to Cibakháza, I’ll lend you another RTA.
Edit: bring the By-ka too, we’ll fix it.
8 Likes
Yes, but it’s not just an air nozzle, it’s the positive pin, so that could be the main culprit. It has to work, these are long-lasting.
8 Likes
Ohh, you’re so sweet, thank you very much!
I quickly looked up a bus because I thought I’d just hop over 
It’s not far… Uh-huh, 2 transfers, 2-3 hours to get there! Unbelievable that they can’t set up decent public transport! Without a car, you’re dead 
But if you want, I’d be happy to mail you the byka, because it’s even cheaper. And you can keep it!
I suffered incredibly much with it until I took off the cover, and everything was so cumbersome with it. I always told the kid to turn it, take it apart because I couldn’t handle it!
Yes, I should have replaced it with another one a long time ago if I suffered so much with it, but the money was always needed elsewhere
Well, now, whether I like it or not, it has to be replaced.
5 Likes
There are other pins for it too… They’re unopened. I just have no idea what the difference is.
I’ll try replacing it, maybe that’s the problem.
6 Likes
Is the ferry not running to Nagyrév?
It would be closer and cheaper too.
7 Likes
It doesn’t run, as far as I know, the Tisza is very low… But I’ll check, it might have started running after all, I just don’t know about it.
Does a bus go from Nagyrév to Cibakháza?
I’m an immigrant, the local villages and transportation are still all a blur to me.
6 Likes
Even if not from Nagyrév, a bus comes this way from that direction.
7 Likes
IMO, the middle bigger screw needs to be checked to see if it’s loose. And the small ones too, of course.
5 Likes
Sorry, I see the guide is ongoing, I don’t want to be a know-it-all, but…
Buy/Sell: there’s a V10 by-ka clone listed. If you manage to fix it, it’s a backup; if not, it’s a solution. And the seller is reliable.
8 Likes
We are 25km away from the solution.
Unfortunately, I only have a bicycle.
5 Likes
Well, I’ll swim across the Tisza if there’s no ferry! I’ve already swum across the Danube 
though that was about 23 years ago
Unfortunately, I don’t have anyone I know who has a car. I’m incredibly introverted to begin with, I have friends from 20-25 years ago but they live at the other end of the country 
No family or relatives, just my 3 kids and my sister who lives 300 km away.
This town is about as introverted as I am, everyone is a foster parent… except me, of course, and they guard their little secrets very closely, and I don’t force friendships. The few people I’ve befriended ride bikes (well, I can’t even do that) or scooters I’m waiting for my eldest son to turn 18 and get his driver’s license (only 1 year left)
But I’ll write you a private message, and if not today, because the return trip is tricky, then let’s figure something out for tomorrow so I can get across.
Until then, I’m stuck with this carburetor that’s been worn out for 2 years… Phew, a truly unforgettable experience! 
7 Likes
I think you should first try to take a photo of it, take out the screw, take a photo of that too, send it here, maybe Zolee can fix it remotely…
8 Likes
I don’t want byka (byka). We are not compatible
6 Likes