# Who ordered what? Who mixed what? (Part 2) **URL:** \ **Category:** Társalgó\ **Tags:** keverés, rendelés, ajánlás, tapasztalat\ **Created:** [June 8, 2025, 4:55pm UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943 "2025-06-08T16:55:16Z")\ **Posts on this page:** 20\ **Page:** 13
**Author:** ![Cepha](https://cdn.vaperina.cc/user_avatar/vaperina.cc/cepha/32/29409_2.png) [@Cepha](https://vaperina.cc/u/Cepha)\ **Post date:** [June 17, 2025, 8:16pm UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/241 "2025-06-17T20:16:37Z")
I’ll write a few sentences tomorrow 😄 Or tonight, so everyone can sleep soundly, no need to toss and turn because of this 😂😂😂😂 ---
**Author:** ![Zsee](https://cdn.vaperina.cc/user_avatar/vaperina.cc/zsee/32/88208_2.png) [@Zsee](https://vaperina.cc/u/Zsee)\ **Post date:** [June 17, 2025, 9:09pm UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/242 "2025-06-17T21:09:22Z")
I have a homemade, self-built mixer, but sometimes when I was too lazy to get it out, I’ve even mixed it with a milk frother, laziness is a great master 🙂 I mix with about 60-40 VG excess, which is thick enough not to make it foamy, just to mix it quickly. And obviously, it doesn’t need hours of mixing, about 10-20 seconds and the aroma disperses nicely. However, you have to be careful not to lift it out while it’s running, because even the far wall of the next room will become liquid, speaking from experience 😄 A few years ago, I bought something similar for about 500 forints from a bargain bin in a Tesco with a bird logo. ![A black, battery-operated milk frother is visible in the picture, which also has a switch. (Subtitled with AI)](https://assets.vaperina.cc/original/3X/b/9/b918d4f7772e1b69aaed19758894ef156f2f5d82.png) ---
**Author:** ![Zoli76](https://cdn.vaperina.cc/user_avatar/vaperina.cc/zoli76/32/27520_2.png) [@Zoli76](https://vaperina.cc/u/Zoli76)\ **Post date:** [June 17, 2025, 9:29pm UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/243 "2025-06-17T21:29:03Z")
…“they spat out the butter, then smeared it around”… 🤣 ---
**Author:** ![Fletcher1976](https://cdn.vaperina.cc/user_avatar/vaperina.cc/fletcher1976/32/70168_2.png) [@Fletcher1976](https://vaperina.cc/u/Fletcher1976)\ **Post date:** [June 17, 2025, 10:50pm UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/244 "2025-06-17T22:50:42Z")
I might give it a try. I’m so sick​😂 ---
**Author:** ![Zoli76](https://cdn.vaperina.cc/user_avatar/vaperina.cc/zoli76/32/27520_2.png) [@Zoli76](https://vaperina.cc/u/Zoli76)\ **Post date:** [June 18, 2025, 4:35am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/245 "2025-06-18T04:35:20Z")
I think it’s no different than any soured coconut cookie​🤣 ---
**Author:** ![Tivadar\_Szocs](https://cdn.vaperina.cc/user_avatar/vaperina.cc/tivadar_szocs/32/38227_2.png) [@Tivadar\_Szocs](https://vaperina.cc/u/Tivadar_Szocs)\ **Post date:** [June 18, 2025, 5:21am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/246 "2025-06-18T05:21:41Z")
Unique 😂🤣 ---
**Author:** ![Sandor\_Oszalnczi](https://cdn.vaperina.cc/user_avatar/vaperina.cc/sandor_oszalnczi/32/96006_2.png) [@Sandor\_Oszalnczi](https://vaperina.cc/u/Sandor_Oszalnczi)\ **Post date:** [June 18, 2025, 6:46am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/247 "2025-06-18T06:46:29Z")
![The image shows a lathe with a rotating metal object being machined. (Subtitled by AI)](https://assets.vaperina.cc/original/3X/2/8/289a1edca768abe3a30b05182b1ed0cceae3fe5a.jpeg) Laziness. ---
**Author:** ![Sajt](https://cdn.vaperina.cc/user_avatar/vaperina.cc/sajt/32/67944_2.png) [@Sajt](https://vaperina.cc/u/Sajt)\ **Post date:** [June 18, 2025, 7:01am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/248 "2025-06-18T07:01:28Z")
This is it! Finally, someone’s going all out. When we ---
**Author:** ![Tyutyika](https://cdn.vaperina.cc/user_avatar/vaperina.cc/tyutyika/32/106550_2.png) [@Tyutyika](https://vaperina.cc/u/Tyutyika)\ **Post date:** [June 18, 2025, 7:03am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/249 "2025-06-18T07:03:30Z")
Nice. So, it’s in the pantry at home? ---
**Author:** ![NxD94](https://cdn.vaperina.cc/user_avatar/vaperina.cc/nxd94/32/107333_2.png) [@NxD94](https://vaperina.cc/u/NxD94)\ **Post date:** [June 18, 2025, 7:11am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/250 "2025-06-18T07:11:10Z")
I think the problem with this is that since the wall of the glass/bottle is smooth, in this position it doesn’t carry the liquid with it. The centrifugal force cannot act on it. Ergo, for the most part, it just spins around the liquid. 😊 ---
**Author:** ![Sandor\_Oszalnczi](https://cdn.vaperina.cc/user_avatar/vaperina.cc/sandor_oszalnczi/32/96006_2.png) [@Sandor\_Oszalnczi](https://vaperina.cc/u/Sandor_Oszalnczi)\ **Post date:** [June 18, 2025, 7:23am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/251 "2025-06-18T07:23:21Z")
Sufni. ---
**Author:** ![Sandor\_Oszalnczi](https://cdn.vaperina.cc/user_avatar/vaperina.cc/sandor_oszalnczi/32/96006_2.png) [@Sandor\_Oszalnczi](https://vaperina.cc/u/Sandor_Oszalnczi)\ **Post date:** [June 18, 2025, 7:25am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/252 "2025-06-18T07:25:18Z")
It’s sticky, it sticks at a certain RPM. It “glides” nicely around the part that’s come back to life below a certain speed. I’ll make a video later. Everything is just rudimentary. It could be good with different balls 😁. Later I want to put a plastic container + balls into the motor [coil](https://vaperina.cc/t/-/187?silent=true#coil-16). Because it looks good 🤣 ---
**Author:** ![Tyutyika](https://cdn.vaperina.cc/user_avatar/vaperina.cc/tyutyika/32/106550_2.png) [@Tyutyika](https://vaperina.cc/u/Tyutyika)\ **Post date:** [June 18, 2025, 7:32am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/253 "2025-06-18T07:32:33Z")
If you have a two or four jawed chuck. You can precisely rotate it crosswise. Then the liquid will be thrown against the flask wall. At work, I usually put it on the extruder’s holdaner (extruder chuck/holder) for about 6 hours at around 32-35 rpm. It takes 1-2 hours for the bubbles to dissipate and it becomes consumable. ---
**Author:** ![Frenkyy](https://cdn.vaperina.cc/letter_avatar_proxy/v4/letter/f/22d042/32.png) [@Frenkyy](https://vaperina.cc/u/Frenkyy)\ **Post date:** [June 18, 2025, 9:01am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/254 "2025-06-18T09:01:13Z")
Hi everyone. I think I’m in the right place. I ordered a Dvarw [MTL](https://vaperina.cc/t/-/187?silent=true#mtl-25) CL [rta](https://vaperina.cc/t/-/187?silent=true#rta-30). My question is, what core size and how many wraps do you use. I have [Kanthal](https://vaperina.cc/t/-/183?silent=true#kanthal-7) A1 26ga or 28ga wire. And I would use it with a fruity e-liquid. Thank you for your help. ---
**Author:** ![Frenkyy](https://cdn.vaperina.cc/letter_avatar_proxy/v4/letter/f/22d042/32.png) [@Frenkyy](https://vaperina.cc/u/Frenkyy)\ **Post date:** [June 18, 2025, 9:02am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/255 "2025-06-18T09:02:44Z")
![Egy kéz egy fekete elektromos dohányzóeszközt (vape-t) tart, amelyen digitális kijelző látható, a háttérben egy szőnyeg és fa padló található. (Feliratozva AI-val)](https://assets.vaperina.cc/original/3X/0/3/03ca8dd3d084ad7796693995c5be890b0594ac6e.jpeg) The subject ---
**Author:** ![Zoli76](https://cdn.vaperina.cc/user_avatar/vaperina.cc/zoli76/32/27520_2.png) [@Zoli76](https://vaperina.cc/u/Zoli76)\ **Post date:** [June 18, 2025, 9:08am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/256 "2025-06-18T09:08:12Z")
The rattling is now a thing of the past 😮🤣 Should I put a zip tie through one of the holes in the rim before I leave for my afternoon shift soon? 🤔😂 ---
**Author:** ![Tyutyika](https://cdn.vaperina.cc/user_avatar/vaperina.cc/tyutyika/32/106550_2.png) [@Tyutyika](https://vaperina.cc/u/Tyutyika)\ **Post date:** [June 18, 2025, 9:43am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/257 "2025-06-18T09:43:09Z")
Do it, but in my opinion it will be a month until it clears up. Until then ---
**Author:** ![Tyutyika](https://cdn.vaperina.cc/user_avatar/vaperina.cc/tyutyika/32/106550_2.png) [@Tyutyika](https://vaperina.cc/u/Tyutyika)\ **Post date:** [June 18, 2025, 9:48am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/258 "2025-06-18T09:48:24Z")
Hi. Congratulations, you have become the proud owner of a dwarf. I specifically use [Dl](https://vaperina.cc/t/-/187?silent=true#dl-26). You can find the answer to your question in the ‘how to [coil](https://vaperina.cc/t/-/187?silent=true#coil-16) and wick’ category, or you can ask your question there too. Essentially, the core and the number of coils depend on what you prefer in terms of resistance. ---
**Author:** ![Paska](https://cdn.vaperina.cc/user_avatar/vaperina.cc/paska/32/104718_2.png) [@Paska](https://vaperina.cc/u/Paska)\ **Post date:** [June 18, 2025, 10:11am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/259 "2025-06-18T10:11:45Z")
Hi!! It’s 28ga 2.5 core 6 wraps! But I use it with 28, 29, 30 ga wire!! 26 ga is more of a [DL](https://vaperina.cc/t/-/187?silent=true#dl-26) wire!! ---
**Author:** ![Zoli76](https://cdn.vaperina.cc/user_avatar/vaperina.cc/zoli76/32/27520_2.png) [@Zoli76](https://vaperina.cc/u/Zoli76)\ **Post date:** [June 18, 2025, 10:26am UTC](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943/260 "2025-06-18T10:26:17Z")
I’ll be poking around on sick leave due to heatstroke…🙄 [Previous page](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943.md?page=12) [Next page](https://vaperina.cc/t/ki-mit-rendelt-ki-mit-kevert-2-resz/59943.md?page=14)