How do you roll, how do you wick? 😊

A few days, and the team will be wiped out :roll_eyes::joy:

6 Likes

Realistic 2.5 ID, 5 wraps? :thinking:


6 Likes

Yes, for me, 2.5 inner diameter, 5 turns

6 Likes

Because he only has 69 ohms!!

4 Likes

Sub-ohm from an MTL tank :rofl::rofl::rofl:

3 Likes

For me, Ni80 29Ga. 1 ohm, Kanthal 2

6 Likes

I have that exact thing in my Kayfun Lite, and as you say, it’s

5 Likes

I forgot, ZIVIPF Kanthal A1 28ga

7 Likes

If it’s okay, it fits. I also get 2.5 mm, 5 wraps, resulting in 0.7-1 Ohm, depending on the wire.
Then it can be problematic if, for example, it heats up slower.

5 Likes

5 wraps can still fit in it, what I find strange with these coils is that the resistance is below 1 Ohm.

3 Likes

Hi! The 0.6-0.7 Ohm range is perfectly fine for Ni80. I’ve been using this for almost two years, and on a 2.5mm inner diameter with 5 wraps, it consistently comes out like this, Dani usually measures this too.

7 Likes

I’m always a bit under 1 ohm (around 0.65-0.8), the resulting resistance of fused claptons is lower, since it’s essentially the ‘braiding’ of 3 thinner wires.

4 Likes

Your clapton coil shows 3.5 ohm/foot, which is approx. 10

2 Likes

It was strange after the Hellvape (2x32G-38G Ni8

3 Likes

The same wire as @Raven_Head shows, the same thread and core!!
Dani shows me this!

8 Likes

The same NI80 Vandy vape superfine
2.5mm ID, 5 wraps
Perfect RDL :rofl:

Always reads between 0.60-0.65 :heart:

8 Likes

Altitude above sea level is different :roll_eyes::thinking:

5 Likes

Well, that’s how it is!! I don’t really use it!! I just put it in the Lite today because I haven’t tried it in there yet!!

2 Likes

Is it really the same wire? There are 2 types of this.. the thinner one is over

2 Likes

The thickness of the wire also matters. With Ga26, five wraps on a 2.5mm inner diameter results in lower resistance than with 30Ga.

4 Likes