Én csak egyszer használtam aromával, most nemrég…az egy Old Captain (nem kivonatos) volt és parádésan adta az ízt.
@TheSoftParade1968 tud neked biztos választ adni…ő használ kivonatos aromát.
6 Likes
Na, egy év használat után a meglévők mellé most úton van újabb 2db B80. Kipróbáltam rajta kb mindent és maximálisan elégedett vagyok a teljesítményével…és hejjj, még a 12 órás repülőúton (stikában szívva), magasabb kabinnyomáson is komolyabb megfolyás nélkül teljesített!
Szóval most jól bespájzolok belőle és részemről a hardver kérdés lezárva…célba értem. Kívánom, hogy érjétek el ti is ezt az érzést az elvárásaitoknak totál megfelelő hardver megtalálásával.
15 Likes
Megvan köszi! 
6 Likes
I spoke with the designer of this panel on cults3d.com because I thought the holes made for the specified 3x1mm magnets had a narrow diameter. They gave me the info that the size is correct and you simply have to press the magnet into the hole with pliers
(without glue). Well, I tested it and it really fit snugly 
You just need to be careful that the side with the correct polarity is facing outwards. I put a thicker piece of paper between the pliers and the magnet fitted into the hole during pressing
By the way, here are many other panel designs from designers: 41 search results for 3D models to 3D print with the keyword(s) “b80”・Cults
If anyone is looking for a reliable person for 3D printing, I recommend Alex… on this site 3dkraft.hu - mentioning me, Alex already has the 3D file of the above model. If you need a different design, you need to download it from cults3d.com and send it to Alex.
8 Likes
My part/component might have forgotten. Or it’s just very busy.
4 Likes
Write to them, but not on PH (they don’t check it anymore), but on
7 Likes
[quote=“Zsolt68, post:126, topic:31553”]
[3dkraft.hu](http://3dkraft
7 Likes
Well, after 15 months, the first drop test onto a cold tile floor has also happened. Fortunately, it works. What’s certain is that a mod+tank combo would have been destroyed in a similar fall… if not elsewhere, then definitely at the 510 connector it would have bent. Another argument for AIOs…but mostly for the B80
10 Likes
Hi everyone, could you recommend a site where I could get one of these devices? For now, I’m stumped, everything is closed, out of stock, and they don’t ship. 
4 Likes
There’s that money 
maybe mine can be for sale.
5 Likes
I wrote 
3 Likes
Within a short time, for the second time within 3 days, I managed to drop mine onto cold tiling… it made a loud crash, fell apart completely, but after putting it back together, it’s fine this time too. This is still the same AIO that has been in use 24/7 (this one only) since last January (1000+ puffs daily ) and with which I started this thread here. So grab the offer from @Tivadar_Szocs… as he surely doesn’t know what he’s missing 
8 Likes
In my opinion, this is one of the best Lost Vape products in recent times. I would be happy if they continued to develop along the lines of the B60 and B80 as well, because their popularity is not accidental.
11 Likes
Well, after 17 months of 24/7 use, I had to say goodbye to the first B80 I bought. It wasn’t the electronics or the fire button that gave up, but the thread of the Boro fixing screw holder wore out so much that the screw can no longer be fixed securely (unrepairable 
).
Lesson for the second unit: I’ll unscrew it less often (not daily) and occasionally give the screw some WD-40. That little condensation that forms isn’t worth unscrewing it daily to wipe it away.
Despite this, the B80 remains highly recommended for me!
10 Likes
Laziness.. can create good solutions.. I always put a piece of paper towel folded in half behind the tank in the device.. about once a week I take it apart and change the paper.
4 Likes
Maybe the liquid level in the Boro is even more visible like that 
4 Likes
I have a device that can do that 
3 Likes
Just don’t let it appear on Ali tomorrow, a 100-piece
4 Likes
If the owner wants a slightly different look, taste, or even feels like experimenting.
Bridge: SXK Exopod
“Boro tank”:SXK Monarchy S’Bo Style
The key is that the bridge’s adjustable pin is not hollow, because the B80 AIO will not work with it.
Smaller coil space than its own, better flavor, the vapor is approximately the same amount.
Sponsor:
10 Likes